OUR WORK
Marshalsea Engineering opened 9th December 2019 and is a specialised CNC manufacturing facility in the Southwest of England.
Our internal capabilities highlight our potential to accommodate any machining requirements. Whilst our scheduling team ensures capacity is maximised and superb efficiency is maintained. We also offer a wide range of sub contractual processes, including Plasma, TIN coating, grinding, Heat treatment and NDT.
OUR PORTFOLIO
See our machines and sample parts.
DOOSAN PUMA MX 2500 ST
CAPABILITIES
9 axis mill-turn machining centre that combines the ability of a twin spindle CNC lathe with the capability of a 5-axis milling machine. These machines allow us to load billet or bar into the main spindle, machine with a combination of milling and turning tools, automatic transfer over to the sub spindle and then continuous machining with milling and turning tools to produce a finished part which can be inspected on the CMM and then dispatched.
40 tool magazine capacity for the milling spindle, 12 driven tool positions on the turning turret, 12” chucks on both main and sub spindles, 76mm diameter bar capacity, 12 turning tool positions facing the main and sub spindles, Fanuc control system.
Equipped with Filtermist extraction system (maintained by SW testing) for the removal of coolant mist and fully interlocked guarding ensures high standards of operator health and safety.
DOOSAN PUMA MX 2000 ST
CAPABILITIES
9 axis mill-turn machining centre that combines the ability of a twin spindle CNC lathe with the capability of a 5-axis milling machine. These machines allow us to load billet or bar into the main spindle, machine with a combination of milling and turning tools, automatic transfer over to the sub spindle and then continuous machining with milling and turning tools to produce a finished part which can be inspected on the CMM and then dispatched.
40 tool magazine capacity for the milling spindle, 12 driven tool positions on the turning turret, 8” chucks on both main and sub spindles, 65mm diameter bar capacity, 12 turning tool positions facing the main and sub spindles, Fanuc control system.
Equipped with Filtermist extraction system (maintained by SW testing) for the removal of coolant mist and fully interlocked guarding ensures high standards of operator health and safety.
DOOSAN LYNX 2100LSY - 2 OFF
CAPABILITIES
Twin spindle high production CNC lathe with C and Y axis makes for a fast compact turning centre with the ability to produce complex milled features on a small scale. 65mm diameter bar capacity with LNS servo driven bar feeders allow for continuous production in a ‘lights out’ environment so that we can offer reduced leadtimes and costs to our customers. 24 position turrets can be kept fully stocked with tools to reduce set up times for all common turning applications.
Fanuc control system.
Equipped with Filtermist extraction system (maintained by SW testing) for the removal of coolant mist and fully interlocked guarding ensures high standards of operator health and safety.
ECOCA SJ 35 HT - 2 OFF
CAPABILITIES
Single spindle, single turret, 2 axis lathes. Super heavy duty machine with the ability to hold 0.005mm tolerance all day no matter what the materials. Used for all manor of work from 316 stainless steel castings to hard turning up to 65 Rockwell M340 steel. The flexibility of these machines replaces the need for many grinding applications and often gives superior surface finishes in a fraction of the cycle time traditionally required.
12 position turret holds all the common turning tools, programmable centre gives support for shaft work. Large spindle bore allows us to hold 3” diameter bar when required. Fanuc control system.
Equipped with Filtermist extraction system (maintained by SW testing) for the removal of coolant mist and fully interlocked guarding ensures high standards of operator health and safety.
GOODWAY GCL-2
CAPABILITIES
Single spindle, single turret, 2 axis lathe. Basic but vital CNC lathe for second op work as well as straightforward turning when required. Equipped with Hainbuch work holding for quick change over and set ups as required. The hardened and ground slideways of this machine give us good reliable performance and solid cutting in the exotic materials that form the basis of our work.
12 position turret holds all the common turning tools, 50mm diameter bar capacity, Fanuc control system.
Equipped with Filtermist extraction system (maintained by SW testing) for the removal of coolant mist and fully interlocked guarding ensures high standards of operator health and safety.
XYZ PROTURN SLX 1630
CAPABILITIES
Semi CNC lathe with the ability to run as a manual machine or a low volume production CNC. Equipped with 8” chuck and 5C collet system for small bar and second op work. Using XYZ’s basic programming system allows quick program writing without the need for full CNC programming knowledge.
BRIDGEPORT TORQ-CUT TC3 - 2 OFF
CAPABILITIES
3 axis CNC mill with a working area 750mm x 350mm x 450mm. Used for a wide range of prismatic machining operations as well as machining of port detail in previously turned components. These Heidainhain controlled machines are quick and easy to use as well as being highly accurate for positionally close tolerance work. 22 position rotary magazines are backed up with large capacity tooling cabinets loaded with preset tools that can be changed over for quick set ups.
Equipped with Filtermist extraction system (maintained by SW testing) for the removal of coolant mist and fully interlocked guarding ensures high standards of operator health and safety.
YCM NSV 66A
CAPABILITIES
3 axis CNC mill but with an additional 3+2 Detron table mounted in the working area to give 5 axis positional capability. This machine is fast and powerful, 22kW spindle and 12,000 rpm. The 30 tool magazine is backed up with large capacity tooling cabinets loaded with preset tools for quick change over and set ups. We have the ability for high-speed precision milling in Aluminium and also heavy cuts in rough stainless castings. The machine has through spindle coolant, automatic tool probing capability and Renishaw component probe for in-cycle verification and part position set up. Heidanhain control lets us share programs across the milling section and utilizes the machines built in programming cycles for quick program generation.
Equipped with Filtermist extraction system (maintained by SW testing) for the removal of coolant mist and fully interlocked guarding ensures high standards of operator health and safety.
MANUAL MACHINING CAPABILITY
A range of manual machines and grinders to cope with small volume enquiries and post heat treatment operations as required. We are well versed in the range of post machining requirements that our customers need and have a trusted supply chain offering heat treatment facilities. We have cylindrical and surface grinders that are well suited to post treatment machining as well as the option for hard turning on the bigger components.
